What Causes Nail Pops In A Home?

What Causes Those Cruddy Drywall Dimples?

Drywall smash pops probably cause builders more wasted time on callbacks than any other problem. These insidious pitted places on formerly perfectly finished walls can be the bane of a builder's existence.

The builder is trying to focus on his adjacent project. Yet, callbacks from unhappy owners of his previous projects distract him from the project at hand. These sometime clients are grumbling about the unsightly bumps and blemishes actualization on their walls. Learn how to fix popped nails in drywall below.

What Are Boom Pops?

In sheetrock walls, nails heads sometimes "pop" through the surface, creating ugly bumps or cracks in the drywall stop. Nail pops look like wall sores.

What Causes Nail Pops?

Two things generally create nail pops: wood framing and improper wallboard installation.

Lumber alters shape every bit its moisture content varies. As moisture content fluctuates, all three axes of a wood stud— length, width, and depth— shrink and expand at different rates. Consequently, the studs in forest framing actually move and change shape.

Over time, the wood studs twist, warp, crack, or creep. The move causes nails to back out of the wallboard and "pop" through the terminate, not bad the wall's textured coating and paint.

Other sources of nail pops include:

Improper spacing of drywall screws or nails
Installing the fasteners at an angle, rather than driving straight into the stud
Missing the stud altogether with the drywall fastener
Nails that are as well short, resulting in bereft penetration of the stud
Overdriving the drywall screws or nails, breaking into the soft gypsum layer of the sheetrock
Using too many— or besides few— drywall connectors
Foundation settling

How Do You Deal with Nail Pops?

There are ii basic ways of fighting boom pops: handling or prevention.

Treatment involves fixing the popped drywall nails equally they appear. Here's how:

Generally, the drywall fastener needs to exist hammered, screwed into place— or even removed, if it was overdriven. Driving in ii nails or screws in a higher place and below the blast pop adds security.
Smooth wallboard compound, commonly known as "mud," over the patch. Exist certain to add together a skilful primer to the compound, or latex paint volition not stick.
Afterwards the mud dries, lightly sand the new patch.
Apply a 2nd light coat of wallboard compound. Later on information technology dries thoroughly, sand equally earlier.
Then, repaint the expanse.

Needless to say, avoiding nail pops by prevention is the easier course. Employing an experienced drywall contractor presents one selection.

Nonetheless, the best way to dodge nail pops and drywall cracks is to build with steel framing instead of woods.

How Steel Buildings Avoid Nail Pops

Commercial-grade, pre-engineered metal building systems eliminate blast pops in three ways.

Offset, prefabricated structures like RHINO's steel buildings do not apply nails. Everything in a steel building kit connects with bolts, nuts, or screws. Screws simply do not back out equally easily as nails do.

Secondly, steel is an inorganic cloth. Steel does not absorb moisture, nor does it change shape with temperature variations. Steel buildings go up directly and true— and they stay that way for the lifetime of the structure.

Thirdly, steel's high strength-to-weight ratio means a low-rise steel structure is actually lighter than a lumber-framed building.

Steel frames up at 25-foot intervals, instead of the xvi-inch spacing of a typical woods edifice. Consequently, steel buildings place far less stress on the foundation, drastically reducing the gamble of the structure settling.

Want to Know More About Prefab Metal Buildings?

Call RHINO Steel Building Systems today at 940.383.9566.

Tagged architect callbacks, builder headaches, drywall nail pops, drywall nails, drywall screws, fixing nail pops, metallic buildings, nail pops, RHINO steel buildings, sheetrock smash pops, steel buildings